Apartment & HOA fencing in Birmingham, Alabama
A 600-foot apartment perimeter or an HOA's pool and entrance fencing behaves like commercial work — long runs, board approvals, phased budgets — because it is. Birmingham Commercial Fence matches apartment communities, HOAs and multifamily properties across Birmingham, Alabama with one independent local installer, document-checked before a first request is routed, who quotes in a form a board or manager can actually approve.
Typical budgets: 600 ft of aluminum at $23–$35/ft runs $13,800–$21,000; the same run in chain link runs roughly half. See the cost guide.
Request a community fence quote
Takes about a minute. A local fence installer — not a call center — follows up.
Your request goes out right away to a local fence installer who serves your area and has completed this site's document check (any license required for the work, plus a current insurance certificate). We ask installers to claim standard requests within 4 business hours; if you flagged a security breach — fence down or property unsecured — we ask the first available installer to claim it within one hour. Once an installer claims your request, you'll get their name and direct number so you can reach them too.
Your request is saved. Every request is confirmed against the commercial program before anything is routed — if a matched local installer can take your project, they'll contact you, and we'll email you an update.
This service currently matches commercial and community projects only, so your request won’t be routed to an installer. For a home fence, contacting a local fence company directly will get you scheduled fastest.
The community fence jobs this page exists for
- Full community perimeters — the long rear and side runs around an apartment property or subdivision edge, usually chain link or vinyl-coated chain link, with aluminum at the street face.
- Pool enclosures — code-driven work: height, picket spacing, and self-closing, self-latching gates are specified by local rules, and the quote should say so.
- Entrance and amenity fencing — the visible runs at entries, clubhouses, courts and playgrounds, where aluminum or ornamental steel earns its premium.
- Dumpster and utility enclosures — the unglamorous fences cities and leases require, screened and gated.
- Phased perimeter replacement — aging community fences rarely fail all at once or fit one year's budget. A good installer quotes the full perimeter and a phase order, so a board can fund the worst sections first at the same per-foot spec.
How community projects get priced — and approved
Community fencing uses the same per-foot math as any commercial job (the cost guide shows the full tables). Two worked examples at a typical community scale:
| Project | Material | Budget band |
|---|---|---|
| 600 ft community perimeter replacement | Aluminum, $23–$35/ft | $13,800 – $21,000 |
| 600 ft community perimeter replacement | Chain link 6 ft, $12–$18/ft | $7,200 – $10,800 |
| 300 ft pool + amenity enclosure | Aluminum, $23–$35/ft | $6,900 – $10,500 |
Budgeting ranges for the Birmingham, Alabama metro — planning only, not a quote. Gates quoted per opening.
For a board or an ownership group, what makes a quote approvable is itemization: linear feet by section, the material spec, gates as separate lines, removal of the old fence in or out, and a phase split if the work will span budget years. Ask for exactly that — it's the format this service's installers are used to quoting in, because it's how commercial work is bought.
Community fencing questions
Our fence is fine in most places and failing in a few. Can we replace it in phases?
Yes — that's the normal pattern for community perimeters. Ask the installer to walk the full line, rank sections by condition, and quote the whole perimeter at one per-foot spec with a phase order. You fund the failing sections now and hold the priced spec for later phases, instead of re-bidding a different fence each year.
What does pool fencing have to comply with?
Local rules for commercial and community pools typically specify minimum height, maximum picket spacing, and self-closing, self-latching gates with latches at a set height. The exact numbers vary by jurisdiction around Birmingham. A quote for pool work should reference compliance explicitly — if it just says "pool fence," ask.
I'm a homeowner in the community — is this the right form for my own yard?
No — this service matches community and commercial projects, and individual residential requests aren't routed to installers. For your own yard, a local fence company's number is the faster path. If your question is about the community's common-area fence, that's exactly what this page is for — send it as the HOA or through your property manager.
Board meeting coming up?
Get an itemized, per-foot quote a board can approve — describe the community and the runs you need.
Request a Fence Quote